Distiller C-Can, Length - 40ft 3in., Width - 8ft 7in., Height - 9ft 3in., Burner C-Can, Length - 40ft 3in., Width - 8ft 7in., Height - 9ft 3in., Distillation tower height - 25ft, Marley Aquatower Model 492 Cooling Tower - SPX Cooling Technologies, ARO double diaphragm pumps - Ingersoll Rand, Feed pump, Product pump, Waste pump, Flojet pumps - Xylem, Dilutive water pump, Level controllers - Kimray, Level control valves - Kimray, Glycol circulating pumps - MP Pumps, 5 HP HTO 120, 7.5 HP HTO 180, Oil circulating pump - MP Pumps, 7.5 HP HTO 180, Vacuum pump LEM series - SIHI, 4 pass heat exchangers, Shell and tube, 2 heat exchangers in series, Length - 10ft, Diameter - 12.8125in., Condenser - American Industrial Heat Transfer, 2 pass shell and tube, Length - 7ft, Diameter - 8in. , Heat exchanger - American Industrial Heat Transfer, 2 pass shell and tube, Cool glycol finished product with cooling tower water, Length - 3ft , Diameter - 6.25in., PLC, Dir

Skid width - 8ft3in., Base to the top of distillation tower - 25ft, Base to the top of evaporator - 13ft9.5in., Marley Aquatower Model 492G Cooling Tower - SPX Cooling Technologies, ARO double diaphragm feed, product and waste pumps - Ingersoll Rand, Flojet pumps for: Tower Reflux/Dilutive Water/Seal Water - Xylem, Level controllers - Kimray, Level control valves - Kimray, Temperature controllers - Kimray, Glycol circulating pump 5 HP HTO 120 - MP Pumps, Oil circulating pump 5 HP HTO 120 - MP Pumps, Vacuum pump Model TRMB 25-30 - Travaini, 4 pass heat exchanger shell and tube - Perry - Length - 12ft GRU-2000-V2.5in. - O.D. - 10.75in. - Tubes (72) - 3/4in. O.D. x 18 GA. x 10ft LG., Condenser - Perry - Length - 10ft2in. - O.D. - 8.625in. - Tubes (55) - 3/4in. O.D. x 18 GA. x 8ft LG., Pneumatic control valves in panel with Isonic 4000 series manifold - Mead Fluid Dynamics, Temperature and Process Controller - Omega, Natural gas burner - Maxon - Series 67 Tube-O-Flame - 8

Capacity: 800 Kn Live Load (81 Tons) Size: Width: 48ft (14.755m) X Length: 60ft (18.8m) CL-800 (Non-Composite) Bridges were Fabricated by Rapid-Span and are Engineer Stamped 6 - 18.29m Long Steel Girders c/w Bolted Bracing, 18 - Precast Concrete Non-Composite Deck Panels, Thrie Beam Railings & Posts (TL-2 Barrier) c/w W-beam and All Associated Hardware Required to Assemble Steel Girders and Precast Deck. Bridge Designed to Meet CL-800 Design Loading DESIGN CODE: CAN/CSA-S6-14. In Service for 2 Years. Bridge Currently Disassembled and in Storage

Efco forms. Flat (parapet) Sections - Qty of 20. Curved sections (Barrier) - Qty 10. Top Form Extensions - Qty 10. Associated Hardware and Accessories Included. all form are 10 Ft long.

Liquid Seperator, Heat Exchanger, Service Liquid Valve, Temperature Regulating Valve

230 V, 3 Phase, 60 Hz

To Fit RITCHFIELD EQUIPMENT 1.8 cube tank mud vacumm, 25 hp 3 Phase Motor, Fruitland vacuum Compressor, explosion proof, float shut off, 480 volt 3 phase

2) 7/8 In to 5-1/2 In buggy heads,( 2)10 In and (1)12 In coil, 10 spare cables, all spare parts

125 PSI, Hoses

2010 US EPA Label, Honda GX620 & GX630 20 hp Gasoline Engine, Includes Three (3) Mast Climber Units (One Stationnary Unit and Two Units with Chassis Base on Wheels), Single Mast Platform Length 40 feet, Maximum Anchored Mast Height 150 feet, Maximum Capacity 6000 lbs ea., Hydraulic Operating Pressure 2900 PSI, Hydraulic rack-and-pinion drive system, Lift Speed 39 feet/minute. Includes 32 x 4ftx4ft deck parts, 100 x wall and std mast parts (some needs repair), 34 x rails parts and additional mounting and utility hardware

To Fit HOT ROD 18-11, 2x HotRot reactor units with control panels. Shredding system with loading hopper, 2x 10hp drive motors, and loading auger, 5 m3 infeed hopper with incline and cross-feed augers and monitoring platform, Horizontal and incline output augers with screener chute attachment. 1/2" minus screening trommel with 1yd3 wheeled cart for catching and unloading screened materials (custom Wilmar Wrangler quick attachment - could be modified for skid steer quick attachment plate). 2x 500 cfm biofilters including exhaust fans and monitors

10 ft x 3 ft

two eye shortening grab hook 13 mm x 20 ft, 10 ft electronic scale, shackle galvanized, ratchet load binder, lever binder, red single type pulley block, double-ply webbing sling , cargo lashing

Base And Top

two eye shortening grab hook 13 mm x 20 ft, 10 ft electronic scale, shackle galvanized, ratchet load binder, lever binder, red single type pulley block, double-ply webbing sling , cargo lashing

1000lb capacity

accessories

1000lb capacity

two eye shortening grab hook 13 mm x 20 ft, 10 ft electronic scale, shackle galvanized, ratchet load binder, lever binder, red single type pulley block, double-ply webbing sling , cargo lashing

Base And Tops

two eye shortening grab hook 13 mm x 20 ft, 10 ft electronic scale, shackle galvanized, ratchet load binder, lever binder, red single type pulley block, double-ply webbing sling , cargo lashing

1000lb capacity

4 x 46(8) 4 x 3(4) 4 x 38(2) 3 x 28(6)

Band Roll, Box of Crimps, Cutter, Crimping Tool